United P2: Pocket Pen

7 02 2015
Time to kick another starter!

Time to kick another starter!

What I have here today is a prototype model of the United P2 Pocket Pen that just launched on Kickstarter. I’ve spent a few weeks throwing it in pockets and bags, I’ve showed it off to nearly everyone I work with, I’ve lost it for almost a week in someone else’s car before finding it again, and I’ve scribbled my fair share of notes with it. Now, my memory is a bit hazy, but this just might be my favorite compact ballpoint pen.

Aluminum body. Stainless steel cap. Machined awesomeness

Aluminum body. Stainless steel cap. Machined awesomeness

It looks part lava lamp, part minimalist rocket. It feels fantastically smooth to the touch, the finish some kind of mix between metal and silk. I’ve left it unprotected, free to jangle against keys, pocket knives, coins, and yet still I can’t find any signs of a scratch yet. I haven’t tried chucking it across a roughly paved parking lot or tried dropping it from the top of a five story building, but I’m not sure I’d want to. I like this pen too much to take the abuse quite that far.

I was worried about a small cap on a pocket pen, but it works

I was worried about a small cap on a pocket pen, but it works

The cap (machined out of solid 17-4 stainless steel bar stock) and its locking grooves are machined so precisely that when you push the cap on, air has nowhere to go, thus requiring the hole in the top of the cap. When you pull the cap off, the air being sucked back in as you pull makes a little pop! when the cap is free. The result is a very secure cap that is nevertheless easy to remove and incredibly fun to play with.

If you grip your pens at the very absolute tip of the pen, this might be a problem, but everyone else will be okay

If you grip your pens at the very absolute tip of the pen, this might be a problem, but everyone else will be okay

Not sure what I was expecting the first time I pulled the cap off, but this wasn’t it. This was something altogether strange and different. This looked like a candle, with the writer’s flame of a ballpoint tip. I was a bit skeptical. But then I followed the groove of the pen and was pleasantly surprised with the result.

I need to work on having a more photogenic grip

I need to work on having a more photogenic grip

For my hand, the prototype is the perfect size. The weight of the pen gives it presence in the hand, but the comfortable way it’s balanced makes the weight almost unnoticeable. The refill included, a medium Schmidt, is nice and smooth in its own right. But the United P2 is designed to take a D1 refill. You know who makes a D1 refill? Do you?! UNI BALL. THE ANSWER IS JETSTREAM. THE ANSWER IS I CAN HAVE A FANCY LITTLE JETSTREAM REFILL POCKET PEN AND A CHOIR OF PENLY ANGELS SHALL SING ABOVE MY HEAD. Ok put that thought on pause. Brad Dowdy has discovered (as I did once he pointed it out and I tried swapping the refill) that the Jetstream refill is too skinny. I HAVEN’T GIVEN UP YET. RESEARCH MUST BE DONE. But I’ll have to come back to this. I’m holding out hope.

UPDATE from the inventor himself:

“Also for the record, the production pen WILL accept all D1 refills. Currently the prototype doesn’t accept some refills because the coating thickness is a little too thick which in turn made the hole size a touch smaller than it needs to be.”

HOPE RETURNS!

Everyday carry approved

Everyday carry approved

Tweaks are already planned for the production run vs. what I have here in the prototype. The pen will be a little larger, both in length and in diameter. Personally I’m fine with the prototype size, but I have medium sized hands. It would be nice, down the line, to perhaps have “large” and “small” size options for the United P2. No one size will be perfect for everyone, but it would be nice to have a choice. I worry that a larger pen wouldn’t fit nicely in the pockets of my fitted jeans. The production run pen will also have a smaller cap hole, which I didn’t have a concern about either way. Finally, the production run will have the press fit cap on the back end of the pen flush with the pen body. It sticks out so slightly on the prototype that I didn’t even notice until I saw this improvement listed, but that update is a good idea. Don’t know when I’d need to stand the pen upright, but just in case.

There are still 28 days to go and already the United P2 has reached its (admittedly easy to attain) funding goal. The makers of this pen have successfully completed a Kickstarter project before (a small brass spinning top that looks really cool and I really want one now, thanks a lot research). If you’re interested in this pen, hop onboard.

United P2: Pocket Pen by Dylan Polseno on Kickstarter

Advertisements

Actions

Information

2 responses

8 02 2015
Thomas Baley

You are a bad influence ;)

22 05 2015
Ink Drop Soup: More Pens to Throw Money At | No Pen Intended

[…] NEWS! My United P2 Pocket Pen arrived last week. Pretty on-point for its estimated delivery time. You can see the final product […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: